Product Details:
Payment & Shipping Terms:
|
Name: | Magnetic Separator | Shell Diameter: | 600 |
---|---|---|---|
Shell Lenght: | 1200 | Shell Rotation Speed(r/min): | <35 |
Feeding Size (mm): | 2-0 | Power(kw): | 1.5 |
High Light: | eddy current metal separator,wet drum magnetic separator |
Wet Drum Magnetic Separator For Mineral And Metal Mine, Magnetic Separator
Structural Introduction to Wet Magnetic Separator
Wet magnetic separator is composed of round cylinder, roll cylinder, brush roll, magnetic system, and trough and drive device. The round cylinder is welded by 2-3mm of corrosion resistant plate and the end cover is aluminum casting or work piece and is connected t the cylinder with stainless screws. The motor drives the round cylinder; magnetic roll and brush roll to rotate through the reducer or electrodeless adjustable-speed motor is directly used to drive them to rotate.
The magnetic system is an open type and is installed inside the round cylinder. The magnetic blocks are installed on the baseboard of the magnet yoke with stainless bolts, and the axle of the magnet yoke stretches out of the cylinder and the end of the axle is fixed with connecting lever. The working area of the trough is made of corrosion resistant plate and the rack and other part of the trough are welded with common iron.
Application
1 For primary rough dressings and refused tails, increasing recovery rate and reducing the load of the second stage grinding.
2 For concentration of ferromagnetic minerals increasing ore grades and recovery rates.
3 Used before a High Magnetism Separator to remove ferromagnetic minerals from ore and prevent magnetic clogging.
4 Removing iron from non-magnetic minerals or materials.
5 Recovering iron from river and sea sand.
6 Removing iron from wet slurry.
Advantages of China Magnetic Separator
1 Short magnetic circuit
2 Little magnetic flux leakage
3 High magnetic intensity
4 Low energy consumption
5 Fine beneficiating results
6 Simple structure and easy maintenance
Parameters type
Model | Shell diameter (mm) |
Shell lenght (mm) |
Shell rotation speed(r/min) |
Feeding size (mm) |
Processing capacoty (t/h) |
Power(kw) |
CTB6012 | 600 | 1200 | <35 | 2-0 | 10-20 | 1.5 |
FAQ
1 Could We Visit Your Factory and Test the Machine?
We warmly welcome you to visit our factory anytime,and we are very glad to test our machine with your raw material.
2 Do You Arrange Shipment For The Machines?
Yes, for FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents.
3 Suitability of motor?
As there are many voltage standards in different countries in the world, please send us your exact information of the power supply available, then we can modify the motor accordingly.
4 After sale service?
we will offer you the best service to you after the sale , the more detail , you can check it in the Service on our website.
5 How about the documents after shipment?
After shipment, we ll send all original documents to you by express, including Packing List, Commercial Invoice, B/L, and other certificates as required by clients.
6 Can I use mark machine with different LOGO and color?
Yes, please confirm details with sales.
Packing & Shipping
1 All the wear out spare parts are packed by plastic films and wooden boxes.
2 Wire cables are used for fastening the machines.
3 FCL: Shipping by standard exporting container.
4 LCL: Poly wood case.
Looking forward to cooperate with you !
Contact Person: wandayu